WDH-“H” Cut Speed Wheels (set of 4)

“H” Cut Tread (SET OF 4)
MOLD MATCHED, REAMED and POLISHED
BSA MARKINGS ARE INTACT INSIDE AND OUT

“H” wheels are turned smooth then undercut about .004″ in the center of the tread, leaving small, flat running edges on both sides. The “H” cut feature reduces the rolling friction by limiting the tread surface contact area to the inner and outer tread edges. This give them and edge over the smooth cut treads. As with my other wheels, the hubs are reamed and then gently polished with my Graphite-Moly blend for exceptional performance right out of the box.

As always – CHECK YOUR RACE RULES!